BTJDX - EZ MOUNT RESIN, RR128

  • MSDS: BTJDX
  • Manufacturer: SHELL
  • Product Name: EZ MOUNT RESIN, RR128
  • National Stock Number: 8010-00N044577
Product Identification

Product ID:EZ MOUNT RESIN, RR128
MSDS Date:04/06/1989
FSC:8010
NIIN:00N044577
MSDS Number: BTJDX

Responsible Party
SHELL
HOUSTON, TX 77210
US

Emergency Phone: 203-653-7201

Info Phone: 203-653-7201

Cage: 5F219

Contractor
SHELL
HOUSTON, TX 77210 US

Telephone: 203-653-7201

Cage: 5F219

Ingredients

OXYGEN IF BREATHING IS DFCLT. GET MED ATTN.

RTECS: 9999999ZZ


NECESSARY UNLESS LARGE QTYS OF PROD ARE INGESTED.

RTECS: 9999999ZZ


INDUCTION IS UNNECESSARY IN HIGH VISCOSITY, LOW

RTECS: 9999999ZZ


BASES, ESPECIALLY PRIMARY & SECONDARY

RTECS: 9999999ZZ


CONSIDERABLE HEAT. RUN-A-WAY CURE RXNS MAY CHAR AND

RTECS: 9999999ZZ


& VAPORS WHICH MAY BE TOXIC.

RTECS: 9999999ZZ


STORAGE/SALVAGE VESSELS. SOAK UP RESIDUE W/AN

RTECS: 9999999ZZ


FLUSH WITH WATER TO REMOVE RESIDUE. SMALL SPILL

RTECS: 9999999ZZ


MAY OCCUR. SOME CURING AGENTS, E.G., ALIPHATIC

RTECS: 9999999ZZ


MASSES CAN CAUSE RUNAWAY POLYM & CHARRING OF

RTECS: 9999999ZZ


VARY WIDELY IN COMPOSITION AND TOXICITY. DO NOT

RTECS: 9999999ZZ


PUMPING TEMP IS 180F MAX. AVOID CONTACT WITH HOT

RTECS: 9999999ZZ


CONTAMINATED CLOTHING BEFORE REUSE.

RTECS: 9999999ZZ


AND SHOULD BE DESTROYED TO PREVENT REUSE.

RTECS: 9999999ZZ


EPICHLOROHYDRIN BI-PHENOL A; (BISPHENOL A/EPICHLOROHYDRIN

CAS: 25068-38-6

Fraction By Weight: 100%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:LD50:(ORAL,RAT) 11.4 G/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: BASED ON PROD TESTING PROD IS MOD
IRRIT TO EYES. CNTCT W/PROD AT ELEVATED TEMPS CAN RSLT IN THERMAL
BURNS. SKIN: BASED ON PROD TESTING PROD IS MOD IRRIT TO SKIN. BASED
ON PROD TESTING PROD MAY CA USE SKIN SENSIT. CNTCT W/PROD AT
ELEVATED TEMPS CAN RSLT IN THERMAL BURNS. INHAL: BECAUSE OF ITS LOW
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: VOLATILITY THIS PROD IS NOT LIKELY TO
BE AN INHAL HAZ. INGEST: BASED ON PROD TESTING PROD IS CONSIDERED
TO HAVE A LOW ORDER OF ACUTE ORAL TOXICITY. SIGNS & SYMPS: IRRIT AS
NOTED. SKIN SENSIT (ALLERGY) MAY BE EVIDENCED BY RASHES.
ESPECIALLY HIVES.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN & EYE DISORDERS
MAY BE AGGRAVATED BY EXPOSURE TO THIS PROD. PREEXISTING SKIN OR
LUNG ALLERGIES MAY INCREASE THE CHANCE OF DEVELOPING INCR ALLERGY
SYMPS FROM EXPOSURE TO THIS PRODUCT.

First Aid

First Aid:EYE: FLUSH W/PLENTY OF WATER FOR @ LST 15 MIN WHILE HOLDING
EYELIDS OPEN. GET MED ATTN. IF CNTCT W/HOT PROD OCCURS IMMED FLUSH
W/COOL WATER FOR @ LST 15 MIN. GET MED ATTN IMMED. SKIN: REMOVE
CONTAM CL THG/SHOES & WIPE EXCESS FROM SKIN. FLUSH W/WATER. FOLLOW
BY WASHING W/SOAP & WATER. IF IRRIT OCCURS. GET MED ATTN. DO NOT
REUSE CLTHG UNTIL CLEANED. CONTAM LEATHER ARTICLES, INCL SHOES,
(SUPP DATA)

Fire Fighting

Flash Point Method:PMCC
Flash Point:480F,249C
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL OR CO*2.
Fire Fighting Procedures:MATL WILL NOT BURN UNLESS PREHEATED. DO NOT
ENTER CONFINED FIRE SPACE WITHOUT NIOSH/MSHA APPRVD SCBA & FULL
PROT EQUIP . COOL FIRE EXPOSED CNTNRS W/WATER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:MAY BURN ALTHOUGH NOT READILY IGNITABLE. USE
CAUTIOUS JUDGMENT WHEN CLEANING UP LARGE SPILLS. LARGE SPILLS: WEAR
RESP AND PROT CLTHG AS APPROP. SHUT OFF SOURCE OF LEAK IF SAFE TO
DO SO. DIKE AND CONTA IN. REMOVE WITH VACUUM TRUCKS AND PUMP TO
(ING 8)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. KEEP FROM
OPEN FLAMES & HIGH TEMPERATURES. CONTAINERS, EVEN THOSE THAT HAVE
BEEN EMPTIED, CAN CNTNR HAZ PROD RESIDUES.
Other Precautions:HANDLE I/A/W THE HAZ POTENTIAL OF CURING AGENT(S)
USED. CUATION: MAY CAUSE IRRIT. AVOID CNTCT W/EYES. AVOID
PRLNGD/PTD CNTCT W/SKIN. HEATING THIS RESIN >300F IN THE PRESENCE
OF AIR MAY CAUSE SLOW OXID ATIVE DECOMP ABOVE 500F. POLYM (ING 11)

Exposure Controls

Respiratory Protection:NOT ORDINARILY REQUIRED. USE NIOSH/MSHA APPROVED
RESP AS REQUIRED TO PREVENT OVEREXP I/A/W 20 CFR 1910.134. USE
EITHER ATM-SUPPY RESP/AIR-PURIFYING RESP FOR ORGANIC VAPORS.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:CHEMICAL-RESISTANT GLOVES.
Eye Protection:ANSI APVD SAFETY GLASSES OR GOGGS
Other Protective Equipment:CLOTHING AS REQUIRED TO MINIMIZE CONTACT.
Work Hygienic Practices:WASH W/SOAP & WATER BEFORE EATING, DRINKING,
SMOKING, APPLYING COSMETICS, OR USING TOILET FACILITIES. LAUNDER
(ING 14)
Supplemental Safety and Health
FIRST AID PROC:CANNOT BE DECONTAM & SHOULD BE DESTROYED TO PVNT REUSE.
IF CNTCT W/HOT PROD OCCURS IMMED FLUSH W/COOL WATER FOR 15 MIN.
CAREFULLY REMOVE CLTHG: IF CLTHG IS STUCK TO A BURN AREA DO NOT P
ULL OFF, BUT CUT AROUND IT. COVER BURN W/A CLEAN MATL. GET MED ATTN
IMMED. INHAL: REMOVE TO FRESH AIR & PROVIDE (ING 2)

Chemical Properties

HCC:T6
Boiling Pt:B.P. Text:>500F,>260C
Vapor Pres:0.03 @ 77F
Spec Gravity:1.17 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VERY LIGHT YELLOW, VERY VISCOUS LIQUID.

Stability

Stability Indicator/Materials to Avoid:YES
CAN REACT VIGOROUSLY W/STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL
ACIDS, & STRONG MINERAL & ORGANIC (ING 5)
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, ALDEHYDES, ACIDS & OTHER ORGANIC
SUBSTANCES MAY BE FORMED DURING COMBUST/ELEVATED (>500F) TEMP
DEGRADATION.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.